|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
ZCS1-120 WATER RESISTANT SOLENOID FEATURES * Water resistant * Capable of handling low and high current requirements * Versatile mounting and termination ORDERING INFORMATION ZCS1-120 1 A 2 1 3 DC6V C 1 1 1 4 5678 1. Part number: ZCS1-120 2. Contact arrangement: A: 1A (SPNO) 3. Coil termination (15in - lb torque spec.) 1. Isolated w/#10-32 terminal (0.22 min. length) 2: Grounded w/#10-32 terminal (0.22 min. length) 3: Isolated w/1/4" Q.C terminal 4: Grounded w/1/4" Q.C terminal 6: Grounded w/#8-32 tapered terminal 7: iSOLATED w/#10-32 terminal (0.45 min. length) 8: Grounded w/#10-32 terminal (0.45 min. length) 4. Coil Voltage: 6,12,14,15, 24, 36, 48 5. Coil Type: C: Continuous I: Intermittent 6. Contact Material and termination (55 in-lb torque spec.): 1: AgCdO with 5/16" -24 terminal (0.38" min. length) 3: Cu with 5/16" -24 terminal (0.38" min. length) 4: Cu with 1/4" -20 terminal (0.50" min length 5: AgCdO with 5/16" -24 terminal (0.50" min. length) 7. Mounting Bracket: 1: Standard 2: "L" shaped bracket 8. Factory Assigned Special's: (where undefined contact factory) 1: Without hardware 2: Extra hardware loosely mounted to solenoid 5: Zinc plated mounting bracket 7: No hardware, zinc plated mounting bracket COIL PARAMETERS * Termination; #8 -32 UNC 2A, #10-32 UNF-2A thread or 1/4" quick connect * Connections: 1. Coil isolated (two terminals) 2. One coil lead grounded to bracket (one terminal) * Coil data: Coil Voltage (VDC) Rated 6 12 14 15 24 36 48 Max 6.6 13.2 15.4 16.5 26.4 39.6 52.8 Coil Resistance (ohm) Int. * 6.0 * 9.4 24.0 54.0 * Cont. 4.0 16.0 26.0 23.0 64.0 160.0 256.0 Must-Operate Voltage (VDC) Int. * 8.04 * 10.05 16.08 24.12 * Cont. 4.5 9.0 10.5 11.3 18.0 27.0 26.0 Coil Power (W) Int. Cont. 24.0 9.0 *Special coils available upon request CONTACT DATA * Contact Arrangement: 1A (SPNO) * Contact Material: AgCd0, or Copper * Termination; 5/16" -24 UNF-2A thread or 1/4" -20 UNC-2A thread Load Voltage (VDC) 12 12 36 *Number of operations Ratings Cont. (A) 80 100 100 In-rush (A) 400 400 400 Elec. Life Contact Material 10000* 50,000* 25,000* Copper AgCdO AgCdO 10/11/06 ZCS1-120 GENERAL DATA Dielelectric Strength Temperature Range Mechanical Life (no load) Mounting position (Recommended) Duty Cycle 500 Volts -20F~150F (-28.9C~65.6C) - Intermittent -20F~120F (-28.9C~48.9C) - Continuous 250,000 cycles Plunger vertical with cap down Continuous; Intermittent: 10sec "on" maximum and minimum 60sec "off". 60sec "on" max and minimum 6min "off." 44-55 in*lbs (Contact terminal); 12-18 in*lbs (Coil terminal) 170.5 grams Hardward Torque specification Weight MECHANICAL DATA 3.253 2 - 0.281X0.400 0.375 1.375 5" 2.4 UNF- 2A 4 16 THREAD TYP 2.125 2.875 0.625 Cap / Plunger #10 - 32 UNF -2A THREAD TYPE Dimensions and Mounting Dimensions and for Standard Bracket Mounting Wiring diagram APPLICATION NOTES: 1.) Not all number combinations are available. Please contact your Sales Representative for available part numbers. 2.) Solenoid applied in battery charging circuits should be protected from higher than rated voltage during charging. The service life may be affected by this condition and the solenoid may or may not operate the circuit as intended. 3.) Circuits should be designed to provide safe operation should the solenoid fail in either the open or closed position. 4.) A back-up wrench must be used to hold the bottom nut stationary during installation. 2.125 10/11/06 |
Price & Availability of ZCS1-120A1DC12VC521 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |